DRILL GRINDER
Grind the chisel edge by our drill grinder HG-III under
HOSOI (click to see the details) Technology.
The HG-III drill grinder has been designed for regrinding drills based on Hosoi technics,
such as the Dijet-Hosoi Drill, the Sandvik Delta Drill or the OSG EX-Gold Drill. However,
HOSOI point geometry can be easily shaped with regular drills, whether carbide or H.S.S.
from 1mm to 32mm without any special technique.
Drills reground on HG-III will have the following characteristics:
① Generated chips take a new trouble-free shape thanks to our radical new technology.
② Penetration speed dramatically increases. (Approximately 2 times)
③ No guide bushes or centering process necessary.
④ Long tool life assured. (Approximately 1.5 times)
SPECIFICATION:
Model | HG-III |
Applicable drill dia. | 1mm - 32mm |
Max distance between spindle nose and wheel |
300mm |
Dia. of spindle bore | 32mm |
Spindle speed | 3,600rpm/60Hz 3,000rpm/50Hz |
Motor | 220V, 0.4kW, 2P |
Required floor space | 380mm x 600mm |
Total weight | 85Kg |
Notes:
1. No limitation in length less than 10mm dia. drill.
2. Use diamond grinding wheel when regrinding carbide drills.
3. These specification are subject to change without notice.
Drills of Every Shape and Size Can be Ground.